Hydraulic Guillotine shears with adjustable tilt angle

JAYKISHAN

Web-site: https://jayshreemachinetools.com

Email: jayshreemachinetools@gmail.com

Tel.number: +917211188104

Why Choose Us?

From 86 000 $

Article: 2729

It may take some time for a response.

Specifications

Robust construction in accordance with international standards
The moving beam is synchronized using differential cylinders
Hardened guide rollers ensure a constant gap between the blades
Adjustable tilt angle depending on thickness and material
Adjusting the gap between the blades using levers for a clean cut
The sheets are fixed hydraulically before cutting
The clamping and cutting forces are adjusted depending on the job being performed.
The angle ruler (600 mm on the right) helps to evenly distribute wear
Front feed with stop and scale on a corner ruler
Both blades are made of high-quality HCHCr steel, with four working edges
Adjustable cutting length and position for short operations
Beam return when releasing the footswitch for small cuts
Illumination of the cutting area for better visibility
The first two clamping elements are located closer to the edges
Angle ruler (600 mm on the left) with guide lines
Rear stop with front control, stroke 1000 mm
Built-in ball table for easy sheet feeding
Supports for long sheets with a length of 600 mm
Rear tray for taking cut sheets out of the cutting area
Movable footswitch for safe operation
Finger protection screen with a good view of the illuminated cutting area
Reliable hydraulics and electrical system from global manufacturers
Compact, energy-efficient hydraulic unit with minimal piping
The electrical wiring is neatly laid and marked for easy troubleshooting.

Model	Cutting length (mm)	Normal tilt angle (M.S.)	Maximum tilt angle (M.S.)	Normal tilt angle (S.S.)	Maximum tilt angle (S.S.)	Variable tilt angle	Strokes/min at min. and max. angle
KHVR – 315	1525	3	4	2	3	0.5 – 2’	26/13
KHVR – 320	2030	3	4	2	3	0.5 – 2’	24/12
KHVR – 325	2540	3	4	2	3	0.5 – 2’	22/11
KHVR – 330	3125	3	4	2	3	0.5 – 2’	20/10
KHVR – 415	1500	4	6	3	4	0.5 – 3’	30/15
KHVR – 420	2000	4	6	3	4	0.5 – 3’	27/12
KHVR – 425	2500	4	6	3	4	0.5 – 3’	26/10
KHVR – 430	3000	4	6	3	4	0.5 – 3’	25/10
KHVR – 440	4000	4	6	3	4	0.5 – 3’	20/08
KHVR – 450	5000	4	6	3	4	0.5 – 3’	15/06

4.9 13